Measuring nitrate concentration in wastewaters with high chloride content

The presence of chloride ions in wastewaters in concentrations above 50 mg/L poses interference in several methods used for the measurement of nitrate-nitrogen. The aim of this study was to characterise the reliability and costs of some commonly available methods for the analysis of nitrate concentration in landfill leachate which contains high chloride levels. To investigate the effect of chloride interference, several widely used methods [ion chromatography (IC), continuous flow analysis (CFA), the German standard method (DIN), cuvette test (CUV), standard addition method (SAM) and reflectometric test (REF)] were used to measure the nitrate concentration in synthetic solutions containing varying concentrations of chloride and nitrate-nitrogen. Nitrate recoveries of the various methods were found to decrease in the following rank order: CUV (>95%) > IC (>90%) > CFA (89%) > DIN (88%) > REF (70%) > SAM (<80%). In the second part of the study, the same methods were used to measure nitrate concentrations in samples of biologically nitrified landfill leachate with and without chloride elimination. For leachate samples without chloride elimination, CUV results were well correlated (linear regression) with IC results (slope = 1.02/R² = 0.99) but to lesser extents with results obtained by CFA (0.91/0.86), DIN (0.89/0.97) and REF (0.86/0.77), and not correlated with SAM (0.74/–1.3). The incurred measurement costs per sample (in Euros) for the methods were as follows: CFA (<0.1) < DIN (0.6) < REF (0.7) < SAM (3) < CUV (3.8) < IC (15). Cuvette tests are recommended as the method of choice due to their accuracy and lower cost than IC.     

飞秒脉冲作用下氯丙烯的多光子解离和电离动力学

The dissociation and photoionization dynamics of C₃H₅Cl were studied at 200, 400, and 800 nm with femtosecond laser pulses. The time-of-flight mass spectra, laser power index and photoelectron images were recorded. At short wavelength (200 nm), ionization of the parent molecule was found to be the dominant channel, while other ions were generated by the dissociation of C₃H₅Cl⁺. With the shift to long wavelength (e.g., 800 nm), fragment ions became dominant, and were generated through the multiphoton ionization of neutral fragments after the photodissociation of C₃H₅Cl. These results imply that photodissociation plays a significant role at long wavelength, because neutral fragments are supposed to be generated from the intermediate states reached by 800 nm photons. At 400 nm, the dissociation on the intermediate states is also critical, but is not as high as that at 800 nm. Taken together, our results demonstrate that the dissociation/ionization behaviors of allyl chloride are wavelength-dependent, and reveal the complex dynamics of allyl chloride at 200, 400 and 800 nm.     

静电喷雾结合热压处理制备荷负电PVA-SA/PAN纳米纤维基复合滤膜及其纳滤性能研究

以静电纺丝聚丙烯腈(PAN)纳米纤维作为多孔支撑层,以亲水材料聚乙烯醇(PVA)和海藻酸钠(SA)为亲水表层材料,通过静电喷雾技术将亲水表层材料沉积在纳米纤维多孔基膜表面,然后将表层PVA-SA纳米串珠层通过水蒸气加湿辅助热压成膜处理在PAN基膜上软化压延形成完整的致密薄膜,最后经过戊二醛交联制备PVA-SA/PAN纳米纤维基复合滤膜.通过对加湿时间、热压温度、热压时间以及PVA-SA静电喷雾时间等成膜工艺条件和交联条件进行优化制备出结构完整的PVA-SA/PAN纳米纤维基复合滤膜.所制备的复合滤膜荷负电,它对阴离子染料具有较好的过滤效果:在0.6 MPa的操作压力下对100 mg/kg的固绿染料的渗透通量为57.1 L/(m~2h),截留率为96.8%.     

超声提取–离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子

采用超声提取的方式,以离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子。对实验条件进行了优化,色谱柱为NJ–SA–4A柱(250 mm×2 mm),保护柱为SI–92G柱(50 mm×4 mm),淋洗液为1.8 mmol/L Na_2CO_3–1.7mmol/L NaHCO_3,流量为1.0 m L/min;在40℃下,对土壤样品提取10 min。Cl~–和SO_4~(2–)在检测范围内均线性良好,线性相关系数为0.999 8,加标回收率分别为95.0%~99.0%,96.0%~101.0%,测定结果的相对标准偏差分别为1.4%,1.0%(n=4)。与传统的方法相比,该法试剂用量少,操作简单,可用于土壤易溶盐样品的测定。     

Zero‐Valent Aluminum as Reducer in Sodium Carbonate Solution for Degradation of Imidacloprid

Imidacloprid (IMI ) was reduced by zero‐valent aluminum (ZVAl ) in sodium carbonate solution and tested by high‐performance liquid chromatography (HPLC ). The IMI degradation rate was heavily dependent on Na₂CO₃ concentration and reaction time but only slightly on temperature, reaching 99.4% in 0.5 mol/L Na₂CO₃ solution with 5 g/L ZVAl in 60 min. The degradation of IMI follows first‐order kinetics. We used high‐performance liquid chromatography‐mass spectrometry (HPLC‐MS ) for analyzing the transformation products, and found that IMI disintegrated into IMI urea, IMI guanidine, IMI nitrosamine, and 1‐choloro‐5‐methcyclohea‐1,4‐diene.     

Efficient copper-catalyzed N-arylation of NH-containing heterocycles and sulfonamides with arenediazonium tetrafluoroborates

A practical copper-catalyzed N-arylation of NH-containing heterocycles with arenediazonium tetrafluoroborates has been developed using CuCl as catalyst and K₂CO₃ as additive under ligand-free conditions. This reaction system has wide substrate scope including imides, 1H-pyrazole, 1H-tetrazoles, 1,2-benzisothiazol-3(2H)-one, and related sulfonamides and gives moderate to excellent yields (up to 95%) of the desired products. This strategy is very general, simple, environmentally friendly, and tolerant of oxygen.     

Efficient synthesis of N-oxysulfonyl formamidines through thionyl chloride-promoted reaction of sulfamates with formamides

N-Oxysulfonyl formamidine derivatives have been efficiently synthesized under mild conditions through direct condensation of various sulfamates and formamides in the presence of thionyl chloride. The scope of this reaction was investigated, and a plausible mechanism was proposed. The resulting N-oxysulfonyl formamidines can be converted to sulfamates through appropriate deprotection.     

Transition-metal-free trifluoromethylthiolation and difluoromethylthiolation of thiols with trifluoromethanesulfonyl chloride and difluoromethanesulfonyl chloride

Triphenylphosphine-mediated metal-free trifluoromethylthiolation and difluoromethylthiolation of thiols by CF₃SO₂Cl and CHF₂SO₂Cl to synthesize trifluoromethyl disulfides and difluoromethyl disulfides, respectively, was achieved at room temperature. Iodine generated in situ from iodide facilitated this reaction via the formation of iodotriphenylphosphonium iodide which could serve as a reducing agent in this transformation. Readily available reagents and mild reaction conditions without transition-metals allow this protocol to be more practical than traditional methods.     

Suzuki-Miyaura cross-coupling reaction of aryl chlorides with aryl boronic acids catalyzed by a palladium dichloride adduct of N-diphenylphosphanyl-2-aminopyridine

One palladium dichloride adduct of a phosphine-pyridine ligand N-diphenylphosphanyl-2-aminopyridine (L₁) [(L₁)PdCl₂] (1) has been prepared and structurally characterized. Compound 1 can be used as an effective catalyst for the Suzuki-Miyaura cross-coupling reactions of unreactive aryl chlorides with aryl boronic acids, and worked much better than its mono- or bidentate phosphine ligands. The reactions with a wide scope of substrates proceeded to give desired products in good to excellent yields.     

Facile removal of tosyl chloride from tosylates using cellulosic materials,e.g., filter paper

Excess tosyl chloride used in the tosylation of alcohols is quickly and easily removed by reacting it with cellulosic materials, e.g., filter paper, and filtering.